Subtotal: £0.00
Posted on Thu, 16th Feb 2023 at 20:26 by National Pumps and Boilers
Domestic water pumps have become an important part of every home because they make sure the taps and showers always have water. However, the water pumps require maintenance the same as any other equipment at home that you use regularly. Also, regular service and maintenance will make the pump work better and keep you from wasting time and money.
If you have been looking for ways to service a domestic water pump, then you have just landed in the right place. In this blog, we'll talk about how to service domestic water pumps, including common problems and why regular maintenance is important.
A domestic water pump is easy to fix and only needs a few simple tools and some knowledge. But if you are doing it for the first time, it can be more tedious. Additionally, without prior knowledge and experience, you may end up damaging your pump.
Therefore, to guide you in the best possible way to service domestic water pumps, we have set guidelines to follow. The following steps will assist you in servicing your domestic water pump:
This is the first step that you need to follow strictly; otherwise, you may have an interaction with electricity. Therefore, before you start to service domestic water pumps, you need to switch off the power supply. This will ensure that you can move forward without any risk of electrical shock while you are working.
Once you have turned off the power supply, the next step is to clean your pump thoroughly. You can do this by wiping down the pump with a damp cloth. This will aid in preventing water and other pollutants from entering the engine. By turning off the power supply and cleaning, you'll be able to start the service process without any problems.
The impeller is a rotating iron or steel disc of the pump that transfers energy from the motor that drives the pump. It moves the water through the pump. However, the impeller can become clogged with dirt or debris over time.
This can further reduce the pump's efficiency. Move the pump cover and inspect the impeller for any defects or debris. To service domestic water pumps, checking the impeller is critical. If the impeller is worn or damaged, it might need to be replaced.
It is essential to ensure that the motor is working correctly because it is the heart of any pump. Be very cautious while checking the motor because you might neglect the damage made by the water. Check the motor for any signs of damage or wear, such as frayed wires or corrosion. If any of these things happen, you should talk to a professional about fixing the motor.
The pressure switch takes responsibility for turning on and off the water pump when water pressure drops below a certain level. Make sure that the pressure switch is working properly to avoid any mishaps. If the switch is not working adequately, you might need to replace it immediately.
Lubricating the pump is an essential part of the servicing process. Put a small amount of lubricant on the motor shaft and bearings to make sure the pump runs smoothly. Add lubrication to your service domestic water pumps checklist before you begin servicing domestic water pumps.
Once you've checked and fixed everything that needs to be fixed, put the pump back together and turn the power back on. Make sure you assemble all the parts you disassembled when servicing such as the motor, impeller, pressure switch etc.
Domestic water pumps must be checked and repaired regularly to ensure proper operation. However, neglecting the service of domestic water pumps can lead to reduced efficiency, increased energy costs, and even complete failure. By setting up regular maintenance, you can find and fix problems before they get worse.
This will make your water pump last longer and save you money in the long run. Check out the best Lowara Ecocirc Series at National Pumps and Boilers to avoid problems with maintenance. For example, the Lowara ecocirc M 15-6/130, Lowara ecocirc S 32-4/180, and Lowara ecocirc M 25-6/180 are among the best pumps available for domestic users.