Subtotal: £0.00
Posted on Thu, 6th Apr 2023 at 09:30 by National Pumps and Boilers
Lowara Pumps has gained the trust of its customers by offering top-notch pumping solutions at affordable prices. The Lowara pumps have been designed with durability, reliability, and peak performance in mind. The Lowara pumps can last longer than usual with little care and maintenance.
However, like any other mechanical and electrical equipment, the Lowara pumps can also encounter problems that might impact their performance. This is quite normal with the equipment that we operate daily. There is no need to worry if you are experiencing issues with your Lowara pumps.
This blog will discuss the most common Lowara pump problems and how you can fix them. Understanding these problems and how to fix them will ensure that your Lowara water pumps are operating efficiently. Let’s begin with the common Lowara pump problems:
Have you been too tired to start your Lowara pump? If that is the case, you are not alone either. This is one of the most common Lowara pump problems that anyone can encounter. If you face this problem, first check if the pump is correctly connected to electricity. This could be a problem with the socket, or you might have missed connecting it to the primary electricity source. If the pump still does not work, check the circuit breaker or fuse box to ensure that there is no blown fuse. However, if you cannot turn on your Lowara pump, call the technician to check, troubleshoot, and repair it.
The Lowara pumps are known for their quiet and efficient operation. However, if your Lowara Ecocirc S 20-4/150 N pump is making noise, it could be a sign of a problem. The cause of the noise could be the air in the pump, which can be fixed by bleeding out the air from the pump. Furthermore, if the pump is not installed correctly, it may make noise. However, you can get rid of these noises by installing them properly with the help of a professional. If there is no air inside and the pump was correctly installed, check the impeller for damage or wear if the noise persists.
Pump leaks are among the most common and easily trackable Lowara pump problems. If you notice water leaking from your Lowara pump, it might be due to a damaged seal or gasket. To fix this issue with your Lowara Ecocirc XLplus N 32-80 pump, turn off the pump and isolate the system from electricity. Remove the pump’s housing and replace the damaged or broken seal or gasket. You can also inspect the pump’s other seals and gaskets to ensure no further damage is done inside the pump.
If your Lowara pump is overheating, it could be due to various reasons, including a damaged impeller, a clogged filter, or low water flow. However, to fix these Lowara pump problems, you must check the impeller for damage and replace or repair it accordingly.
Now you need to check the filter of your Lowara Ecocirc XLplus D 50-150 F pump and clean or replace it if it is clogged. Finally, check the system's water flow and adjust it accordingly.
If your Lowara pump motor is running hot, it could be due to a malfunctioning motor or a problem with the pump's cooling system. To fix this issue, you must check the motor’s bearings and replace them if they are worn out. Now you must check the pump’s cooling system and clean or replace any clogged or damaged parts.
Lowara pumps are known for their reliability, but they can experience problems from time to time. There is no need to worry about the Lowara pump problems because you can easily detect and fix them at your own convenience. Considering the Lowara pump problems mentioned above, you can determine and resolve these issues without professional assistance.
If you are in the market for Lowara pumps, then consulting National Pumps and Boilers is worth it. They have a fleet of professionals who can install, replace, and repair your Lowara pumps exceptionally well. So, if you are looking for Lowara Pumps' services, call them now!